*** Press a key or click the mouse to exit. *** (This file is GDSMODE.TXT) лллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллл ллллллллллллллллллллллллл VIDEO MODE CONFIGURATION ллллллллллллллллллллллллллл лллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллл The following procedure configures GDS to run with your specific hardware and software configuration. Follow the simple instructions and GDS will test each video mode and allow you to tell GDS which modes work properly. кФФФФФФФФФФФФФФФФФФФФФФФФФФФФП Г PRESS [Enter] TO START Г РФФФФФФФФФФФФФФФФФФФФФФФФФФФФй NOTE: If your video configuration changes (new video card, monitor or VESA compatibility TSR), delete the "CONFIG" file (in the GDS directory) and run GDS. GDS will automatically lead you through the configuration process. See notes below for some helpful information. HELPFUL INFORMATION ABOUT VIDEO COMPATIBILITY: Most problems with GDS involve display problems which can be overcome by going through this section. The most common problems are briefly described below: Problem: "When I try to look at pictures, the screen sometimes goes crazy." Reason(s): 1) GDS is choosing video modes which require a faster monitor. Some video cards have high resolution modes which some monitors just can't handle. This video configuration setup allows you to tell GDS which modes don't display properly. Problem: "When I look at some pictures, only the top of the screen is displayed, and it is drawn several times...like the picture is being wrapped around the top of the screen over and over again..." Reason(s): a) GDS is unable to properly access more than 64K of the video memory on the video card. The most common reason for this is "clone" video cards which do not match the original designers' specifications, or simply a card which GDS cannot detect accurately. It may be possible to force proper support by using /VESA, /TSENG4, /PARA, /OAK, or one of the other video type command line parameters. b) The VESA support built into the video card is not properly implemented. We have seen many video cards which just don't implement VESA properly. Check with the video card manufacturer to see if there is a ROM BIOS upgrade available (usually for free) or a VESA TSR which can be loaded to correct the problems. Problem: "I only get display resolutions up to 360x480x256, but I have a Super VGA that should do lots of high resolutions." Reason(s): a) GDS is unable to discover that the VGA is anything more than a standard VGA, and VESA support is not working properly. Don't be alarmed, this is actually common. Try using the /VESA command line parameter to force full blown VESA, and go through this video configuration process. b) The card installed is a very strange video card which GDS doesn't support. We have piles of Super VGA's, but there are always new ones coming out, sometimes faster than they can be supported. Contact the manufacturer of the video card to see if they have sent us an evaluation card to test for GDS compatibility. Problem: "When I look at some pictures, my machine locks up, and I have to reset it or turn on and off the power to get it back." Reason(s): a) The video BIOS of the card is really buggy. There are several video cards on the market like this, but we won't mention names... If you are having this problem, call the manufacturer and ask if they have sent an evaluation card for GDS compatibility testing. лллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллл END OF GDSMODE.TXT - Thank you for choosing GDS.